Thanks for purchasing the Edge v2 – Red Edition – Corner Gaming Desk
From Play M8 Gaming.
Below you find a detailed description with video tutorials, which shows how to assemble and setup your Play M8 Edge v2 in the easiest way.
Thanks for your support.
Unpack carefully the brown box with the Steel Legs, Beams, Mouse Pad – and Toolbox.
To the right, you see an overview of what the box contains and the names for each part.
In the brown box you have in total 4 pcs of beam parts*. First we start in assembling the 2 beams.
In the brown toolbox you also find the grey plastic Tabletop Supporters. The Tabletop Supporteres should be mounted on the small holes – on the side of the beams. Use the small metallic screws to install Tabletop Supporters on both BEAMS.
Lets move to the next step:
In the brown box, you have 2 pcs of Large Steel Legs – for the main desk and 1 pcs of small Steel Leg – for the corner.
Now it is time to install the “BEAM CONNECTOR” to all 3 Steel Legs. In the brown toolbox you finds 3 pcs of BEAM CONNECTORS.
1. Attach the BEAM CONNECTOR to each Steel Leg. Use Large Hexagon Bolts – 2 pcs. Do this on all 3 Steel Legs.
Next: Place or slide – the “BEAM RIDER” on top of the BEAM CONNECTOR – on all 3 Steel Legs.
When you are done with this task – the Steel Legs are ready to be connected to the beams.
Please note that the LARGE Beam have 2 holes as shown at the picture. Make sure that the beam – with holes are placed in the side where the corner are supposed to be placed.
You have now: Two assembled beams. (One LARGE and one SMALL BEAM).
And you have in total 3 steel legs with Beam Connectors & Beam Riders installed.
Now its time to connect the steel legs with the beams:
Steel Frame – with Left Corner
Congratulations, your Steel Frame is now assembled.
Lets move on to the next part: The Installation of Tabletops.
Steel Frame – with Right Corner
Carefully open the box with Tabletops.
(Don’t use a knife when you open the big brown box)
Place the tabletops carefully on a carpet on your floor – as shown on the illustrations below:
If you have ordered the Edge v2 – Right Side. Then place the tabletops on your floor as shown
If you have ordered the Edge v2 – Left Side. Then place the tabletops on your floor as shown
Please note that you actually can flip around the small corner tabletop for the “L” corner. This gives you the opportunity to choose where you want the Wireless Charger to be placed.
When you have placed the tabletops on the floor – then place the Steel Frame on top of the Tabletops – on your floor.
Play M8 recommends that 2 persons brings the desk in the right position – in your Gaming Room.
If the Mouse Pad feels a little too small, you can “stretch” the mouse pad – duing the next couple of days.
Place the tabletops on a carpet on your floor – as show on below. If you have a Edge v2 – Left or Right – then please check below; how you should setup the tabletops.
Before installing the USB RGB LightPack. (Check our installation guide for RGB LightPacks on our support page)
Install the Headset Hanger. You have the freedom to choose where exactly you want the hanger to be placed.
We have pre-drilled a hole for the Wireless Charger on the corner tabletop. Simply place the charger in the hole – and connect it to your high-speed phone charger.